Anfon E-bostGwifren Adeiladu BVV Gwain PVC Inswleiddiedig Ysgafn ar gyfer Gwifrau Sefydlog.
Ceisiadau:
Defnyddir Gwifren Adeiladu Trydan 60227 IEC 10 BVV mewn gosod pŵer, offer trydanol cartref, offeryn, offer telathrebu, rheoli switsh, ras gyfnewid ac offeryniaeth paneli switsh pŵer ac at ddibenion megis cysylltwyr mewnol mewn offer cywiro, cychwynwyr modur a rheolwyr.
.
Perfformiad Technegol:
Foltedd Graddedig (Uo/U):300/500V
Tymheredd y dargludydd:Uchafswm tymheredd dargludydd mewn defnydd arferol: 70ºC
Tymheredd gosod:Ni ddylai tymheredd amgylchynol yn ystod y gosodiad fod yn is na 0ºC
Radiws plygu lleiaf:
Radiws plygu'r cebl: (D-Diamedr y cebl)
D≤25mm-----------------≥4D
D>25mm-----------------≥6D
Adeiladu:
Arweinydd:Nifer y creiddiau: 1,2,3,4 neu 5
Rhaid i'r dargludyddion gydymffurfio â'r gofyniad a roddir yn IEC 60228 ar gyfer dosbarth 1 neu 2.
– dosbarth 1 ar gyfer dargludyddion solet;
– dosbarth 2 ar gyfer dargludyddion llinynnol;
Inswleiddio:PVC (Polyfinyl Clorid) Math PVC/C yn ôl IEC
Gwain:PVC (Polyfinyl Clorid) Math PVC/ST4 yn ôl IEC
Manylebau:
Safon IEC 10 60227
Gwifren Adeiladu BVV Gwain PVC Inswleiddiedig PVC Ysgafn 60227 IEC 10
| Ardal Trawsdoriadol Enwol y Dargludydd | Dosbarth o arweinydd | Trwch Inswleiddio Enwol | Diamedr Uchafswm Cyffredinol | Gwrthiant DC Uchaf ar 20 ℃ (Ω/km) | Gwrthiant Inswleiddio Min. ar 70 ℃ | |
| (mm²) | / | (mm) | (mm) | Plaen | Wedi'i orchuddio â metel | (Ω/km) |
| 2×1.5 | 1 | 0.7 | 10 | 12.1 | 12.2 | 0.011 |
| 2×1.5 | 2 | 0.7 | 10.5 | 12 | 12.2 | 0.01 |
| 2×2.5 | 1 | 0.8 | 11.5 | 7.41 | 7.56 | 0.01 |
| 2×2.5 | 2 | 0.8 | 12 | 7.41 | 7.56 | 0.009 |
| 2×4 | 1 | 0.8 | 12.5 | 4.61 | 4.7 | 0.0085 |
| 2×4 | 2 | 0.8 | 13 | 4.61 | 4.7 | 0.0077 |
| 2×6 | 1 | 0.8 | 13.5 | 3.08 | 3.11 | 0.007 |
| 2×6 | 2 | 0.8 | 14 | 3.08 | 3.11 | 0.0065 |
| 2×10 | 1 | 1 | 16.5 | 1.83 | 1.84 | 0.007 |
| 2×10 | 2 | 1 | 17.5 | 1.83 | 1.84 | 0.0065 |
| 2×16 | 1 | 1 | 20 | 1.15 | 1.16 | 0.0052 |
| 2×25 | 2 | 1.2 | 24 | 0.727 | 0.734 | 0.005 |
| 2×35 | 1 | 1.2 | 27.5 | 0.524 | 0.529 | 0.0044 |
| 3×1.5 | 2 | 0.7 | 10.5 | 12.1 | 12.2 | 0.011 |
| 3×1.5 | 1 | 0.7 | 11 | 12.1 | 12.2 | 0.01 |
| 3×2.5 | 2 | 0.8 | 12 | 7.41 | 7.56 | 0.01 |
| 3×2.5 | 1 | 0.8 | 12.5 | 7.41 | 7.56 | 0.009 |
| 3×4 | 2 | 0.8 | 13 | 4.61 | 4.7 | 0.0085 |
| 3×4 | 1 | 0.8 | 13.5 | 4.61 | 4.7 | 0.0077 |
| 3×6 | 2 | 0.8 | 14.5 | 3.08 | 3.11 | 0.007 |
| 3×6 | 1 | 0.8 | 15.5 | 3.08 | 3.11 | 0.0065 |
| 3×10 | 2 | 0.1 | 17.5 | 1.83 | 1.84 | 0.007 |
| 3×10 | 1 | 1 | 19 | 1.83 | 1.84 | 0.0065 |
| 3×16 | 2 | 1 | 21.5 | 1.15 | 1.16 | 0.0052 |
| 3×25 | 1 | 1.2 | 26 | 0.727 | 0.734 | 0.005 |
| 3×35 | 2 | 1.2 | 29 | 0.524 | 0.529 | 0.0044 |
| 4×1.5 | 2 | 0.7 | 11.5 | 12.1 | 12.2 | 0.011 |
| 4×1.5 | 1 | 0.7 | 12 | 12.1 | 12.2 | 0.01 |
| 4×2.5 | 2 | 0.8 | 13 | 7.41 | 7.56 | 0.01 |
| 4×2.5 | 1 | 0.8 | 13.5 | 7.41 | 7.56 | 0.009 |
| 4×4 | 2 | 0.8 | 14.5 | 4.61 | 4.7 | 0.0085 |
| 4×4 | 1 | 0.8 | 15 | 4.61 | 4.7 | 0.0077 |
| 4×6 | 2 | 0.8 | 16 | 3.08 | 3.11 | 0.007 |
| 4×6 | 1 | 0.8 | 17 | 3.08 | 3.11 | 0.0065 |
| 4×10 | 2 | 1 | 19 | 1.83 | 1.84 | 0.007 |
| 4×10 | 1 | 1 | 20.5 | 1.83 | 1.84 | 0.0065 |
| 4×16 | 2 | 1 | 23.5 | 1.15 | 1.16 | 0.0052 |
| 4×25 | 1 | 1.2 | 28.5 | 0.727 | 0.734 | 0.005 |
| 4×35 | 2 | 1.2 | 32 | 0.524 | 0.529 | 0.0044 |
| 5×1.5 | 1 | 0.7 | 12 | 12.1 | 12.2 | 0.011 |
| 5×1.5 | 2 | 0.7 | 12.5 | 12.1 | 12.2 | 0.01 |
| 5×2.5 | 1 | 0.8 | 14 | 7.41 | 7.56 | 0.01 |
| 5×2.5 | 2 | 0.8 | 14.5 | 7.41 | 7.56 | 0.009 |
| 5×4 | 1 | 0.8 | 16 | 4.61 | 4.7 | 0.0085 |
| 5×4 | 2 | 0.8 | 17 | 4.61 | 4.7 | 0.0077 |
| 5×6 | 1 | 0.8 | 17.5 | 3.08 | 3.11 | 0.007 |
| 5×6 | 2 | 0.8 | 18.5 | 3.08 | 3.11 | 0.0065 |
| 5×10 | 1 | 1 | 21 | 1.83 | 1.84 | 0.007 |
| 5×10 | 2 | 1 | 22 | 1.83 | 1.84 | 0.0065 |
| 5×16 | 2 | 1 | 26 | 1.15 | 1.16 | 0.0052 |
| 5×25 | 2 | 1.2 | 31.5 | 0.727 | 0.734 | 0.005 |
| 5×35 | 2 | 1.2 | 35 | 0.524 | 0.529 | 0.0044 |
Mwy o Gynnyrch
